Cheap HPMC for Wall Putty and Cement Mortar

• Type: Thickener, Viscosity Reducer Admixture
• Name: Hydroxypropyl Methyl Cellulose
• Application: Tile Adhesive, Construction Mortar, etc
• pH Value: 7-8
• Classification: Chemical Auxiliary Agent
• Color: Sub-White, White
• Model NO.: HPMC
• Ash: 2% Max
• Usage: Coating Auxiliary Agents
• Appearance: White Power
• Other Names: Hydroxypropyl Methyl Cellulose
• Level: Primer
• Main Raw Material: Refined Cotton
• Water: 5% Max
• Raw Material: Refined Cotton
• Viscosity: 200-200000
• Transport Package: in Bag
• Specification: 20/25 kg per bag
• Trademark: XINWEITE
• Origin: China
• HS Code: 3912390000
• Production Capacity: 500t/Month

Product Description

Introduction
HPMC also called Hypromellose and Cellulose. It made of fine cotton which carefully selected by us. The cotton is handled under special etherification in alkaline conditions. The whole process is completed under automatic monitoring. HPMC is a kind of white powder, which is odorless and tasteless. This product is non-ionic cellulose ether. So what field HPMC can be applied to? We will give you a general introduction.


Application
We can apply it in cement mortar to increase the dispersability of cement and sand blender.Otherwise it also help water retain in mortar to enhance moisture, such kind of operation is conductive to prevent cracks and enhance the strength of cement.
It can be applied in ceremic tile cement to increase the plasticity of it, increase the viscosity of glue and prevent it becoming powder.
We can use it as coating material, so as to improve fluidity of the coating material and glue relay to the base.

Factory



Construction industry
1. Cement mortar: Increase the dispersion of cement-sand, greatly improve the plasticity and water retention of mortar, which is effective in preventing cracks, and can enhance the strength of cement.
2. Ceramic tile cement: improve the plasticity, water-holding capacity of pressed ceramic tile mortar, improve the bonding strength of ceramic tile, and prevent powdering.
3. Coating of asbestos and other refractories: as suspension safety agent, fluidity improver, but also improve the adhesion to the substrate.
4. Gypsum coagulant slurry: improve water retention and processability, improve the adhesion to the base.
5. Joint cement: Joint cement added to gypsum board to improve fluidity and water retention.ect


1.Customize service.
On the basis of our existing products, customize products according to customers' needs, including customize logo, customized packaging, graphic customization,etc.
2.Independent production.
We have our own factory with obvious price advantage, guaranteed product quality and large inventory.
3.Fast delivery.
Our warehouse is located in the international logistics port, which is convenient for receiving and dispatching.

Product Name	HPMC Cellulose
Product Name	HPMC
Methoxy content(%)	18-32
Hydroxypropyl content(%)	8-----16
Gel temperature(%ºC)	54-75 C
Water(%)	≤5%
Ash(Wt%)	≤2%
PH value	7---8
Appearance	White Powder
Fineness (mesh)	80-100.mesh
Viscosity(mpa.s)	200-200000,also can produce according to customer's requirements
surface treatment	cold water insant type: surface treatment	Non-insant type: without surface treatment

Wall putty
•Water retention: maximized water content in slurry.
•Anti-sagging: when spreading a thicker coat corrugation can be avoided.
•Increased mortar yield: depending on the weight of the dry mixture and appropriate formulation ,HPMC can increase the mortar volume.

Exterior Insulation and Finish System ( EIFS )
•Improved adhesion.
•Good wetting ability for EPS board and substrate.
•Reduced air entrancement and water uptake.

Self-leveling
•Protection from water exudation and material sedimentation.
•No effect on slurry fluidity with low viscosity
HPMC, while its water retention characteristics improve the finish performance on the surface.


Packaging
HPMC are packed in the following two types of packages.
A. 25 Kg bag with polyethylene inner ,and 12 MT with pallet is loaded in one container of 20 ft.
B. 25 Kg bag with polyethylene inner ,and 14 MT without pallet is loaded in one container of 20 ft

FAQ
1. Are you have your own factory?
  YES, we have our own factory and can provide our customer tailed products.
2. what's your payment term?
  T/T(50% in advance and balance against B/L copy) or L/C at sight. If you are regular customer, our company allow T/T(30% in advance and balance against B/L copy)
3. How can I get the latest price of the products?
You can contact me freely at any time, kindly send me the required products and tell me what are you used for.
4. Can we get free sample?
  Of course, we provide our customer free samples of different grades for your test.But you need to pay the freight.
5. Where is your factory located?
  Our company located at Shijiazhuang,Hebei province, China. Welcome to visiting our factory.
6. How long is your delivery time?
  It is generally about 10 days.